MCT EQUIPMENT

The HTH 10.10 telescopic handler is ideal for moving large, bulky loads in complete safety.
Able to lift up to 10 tonnes, it is compatible with a wide range of accessories, making it extremely versatile. Equipped with an RFID system which provides automatic recognition of the various attachments used, this telescopic handler is able to meet a wide range of applications in heavy industry. Its four-wheel drive system, three manoeuvring modes and high ground clearance makes it highly manoeuvrable on all terrains.
The standard machine configuration includes:
CAB
Comfort seat
Adjustable steering column
Analogue joypad
Heating
Air conditioning
FM/AM radio with USB and Bluetooth connectivity
USB Type-A (5 V) inputs
REAL TIME INFORMATION
Touchscreen, 7
MCTS Magni Combi Touch System on-board software
Automatic RFID tools recognition system
LMI Load Moment Indicator
Onboard and remote integrated diagnostics
TECHNICAL SPECIFICATIONS
Q-Fit standard
Provision for platform
Two-line CAN BUS system
Automatic front and rear wheel alignment
Automatic parking brake
Mechanical battery cut-off in engine compartment
Electrical system: 24 V IP67
Specifications:
o Lifting capacity: 10,000 kg
o Capacity at maximum height: 5,500 kg
o Lifting height: 9.50 m
o Reach: 5.0 m
o Engine: Deutz TCD 3,6 L4 - Stage IIIA
o Rated power: 100 kW (134 hp) 2.200 rpm
o Number of gears: 2/2
o Hydraulic system: 350 bar (Load Sensing)
o Length: 5.66 m
o Width: 2255 m
o Ground clearance: 370 mm
o Unladen weight: 13,200 kg
o Travel speed: 40 km/h
o Climate control as standard: Yes
o Automatic accessory recognition: Yes
o Reversable fan drive: Yes

2026 MAGNI HTH 10.10

2025 MAGNI RTH 6.26

2026 MAGNI TH 3,5.7

The TH 7.10P is a fixed telescopic handler especially suitable for light industry.
Powered by a Deutz 74,4 kW , it can safely reach a height of 9.50 m on rough terrain thanks to its 4-wheel drive.
The hydrostatic transmission offers precision and manoeuvrability. This machine is compatible with a wide range of attachments. It is equipped with the R.F.ID system which allows for automatic recognition of attachments and the creation of the relative load charts.
This model is equipped with the levelling system on tyres allowing the operator to adjust the inclination of the machine. Thus, the entire load diagram is available for any type of operation, even when under normal conditions the slope of the terrain could affect lifting performance.
Some features:
Lowered design for greater stability
Available with Deutz Stage V and IIIA engines
Available in two engine sizes, 55 kW and 75 kW, to suit your needs
350 bar L/S hydraulic system
4WD
Specifications:
o Stabilizers: None
o Lifting capacity: 7,000 kg
o Capacity at maximum height: 6,000 kg
o Lifting height: 9.50 m
o Reach: 5.90 m
o Engine: Deutz TCD 3,6 L4 EDG - Stage IIIA
o Rated power: 74,40 kW (101,20 hp) 2.200 rpm
o Number of gears: 2/2
o Hydraulic system: 350 bar (Load Sensing)
o Length: 6.08 m
o Width: 2.48 m
o Ground clearance: 400 mm
o Unladen weight: 12.000 kg
o Travel speed: 35 km/h
o Climate control as standard: Yes
o Automatic attachment recognition: Yes

2026 MAGNI TH 7.10P

The TH 5,5.19P is a fixed telescopic handler especially suitable for demanding light industrial sites. Powered by a Deutz 74,4 kW engine, it can safely reach a height of 18.80 m on rough terrain thanks to its 4-wheel drive and the automatic levelling system, which acts on both the wheels and stabilisers. The hydrostatic transmission offers precision and manoeuvrability.
This machine is compatible with a wide range of attachments. It is equipped with the R.F.ID system which allows for automatic recognition of attachments and the creation of the relative load charts.
This model is equipped with the levelling system on tyres allowing the operator to adjust the inclination of the machine. Thus, the entire load diagram is available for any type of operation, even when under normal conditions the slope of the terrain could affect lifting performance.
Some features:
o Lowered design for great stability
o Standard pivoting stabilisers for optimised lifting capacities up to 5.5 tonnes
o 350 bar L/S hydraulic system
o 4WD
Specifications:
o Stabilisers: Pivoting
o Lifting capacity: 5,500 kg
o Capacity at maximum height: 3,000 kg
o Lifting height: 18.80 m
o Reach: 14.20 m
o Engine: Deutz TCD 3,6 L4 EDG - Stage IIIA
o Rated power: 74,40 kW (101,20 hp) 2.200 rpm
o Number of gears: 2/2
o Hydraulic system: 350 bar (Load Sensing)
o Length: 6.35 m
o Width: 2.48 m
o Ground clearance: 400 mm
o Unladen weight: 13,500 kg
o Travel speed: 35 km/h
o Climate control as standard: Yes
o Automatic accessory recognition: Yes

2026 MAGNI TH 5,5.19P

2025 MAGNI RTH 5.18

2026 MAGNI RTH 5.25

The TH 4,5.15P is a fixed telescopic handler especially suitable for demanding light industrial sites. Powered by a Deutz 74 kW engine, it can safely reach a height of 15,20 m on rough terrain thanks to its 4-wheel drive and the automatic levelling system, which acts on both the wheels and stabilisers.
The hydrostatic transmission offers precision and manoeuvrability. This machine is compatible with a wide range of attachments. It is equipped with the R.F.ID system which allows for automatic recognition of attachments and the creation of the relative load charts.
This model is equipped with the levelling system on tyres allowing the operator to adjust the inclination of the machine. Thus, the entire load diagram is available for any type of operation, even when under normal conditions the slope of the terrain could affect lifting performance.
Some features:
o New enhanced and unparalleled lifting capacities
o Completely redesigned machine management software
o Greatly improved dynamic load chart visualisation
o Fully revised hydraulic and electrical systems to facilitate After sales service
o Lowered design for greater stability
o Available with Deutz Stage V / Stage IIIA engines
o Standard pivoting stabilisers for optimised lifting capacities up to 4.5 tonnes
Specifications:
o Stabilisers: Pivoting
o Lifting capacity: 4,500 kg
o Capacity at maximum height: 3,500 kg
o Lifting height: 15.20 m
o Reach: 10.40 m
o Engine: Deutz TCD 3,6 L4 EDG - Stage IIIA
o Rated power: 74,40 kW (101,20 hp) 2.200 rpm
o Number of gears: 2/2
o Hydraulic system: 350 bar (Load Sensing)
o Length: 6.41 m
o Width: 2.53 m
o Ground clearance: 410 mm
o Unladen weight: 12,200 kg
o Travel speed: 35 km/h
o Climate control as standard: Yes
o Automatic attachment recognition: Yes

2026 MAGNI TH 4,5.15P

2026 MAGNI RTH 8.46

2022 MAGNI HTH 10.10

2026 MAGNI HTH 20.10

With capacity of 3 tonnes and lifting height of 5.8 metres, the new TH 3.6 combines small size with impressive performance. In fact, the most compact fixed telescopic handler in the TH range, intended for the construction and logistics sectors and soon also for agriculture, is able to lift its maximum load to a height of 5.4 metres, 2,500 kg to the maximum height and 1,100 kg to a horizontal reach of more than 3 metres (10 feet). Its low-level design makes it ideal for tight spaces, while retaining optimal ground clearance for uneven terrains.
These characteristics, together with a Deutz Stage V engine of 75 kW give it a top speed of 35 km/h. The four-wheel drive and steering, with hydrostatic transmission, provide superlative stability and manoeuvrability with 3 steering modes: front, concentric and crab.
With the launch of the TH 3.6 Magni also presents the new compact cab, which maintains the same development approach as its predecessor in the TH range together with a new dashboard that optimises the user experience through the ergonomic placing of the main controls. It also features USB ports (3.0 and c-type) for charging electronic devices and a handy cup holder. The new cabs standard outfit is completed by the air-suspended seat, adjustable steering column, heating and radio.
Consulted via the 7 inch touch screen, the MCTS (Magni Combi Touch System) on-board software provides complete control of the machine with icon-based navigation. From the main menu, the operator can access the themed screens with the various functions, including load charts.
Specifications:
o Stabilizers: None
o Lifting capacity: 3,000 kg
o Capacity at maximum height: 2,500 kg
o Lifting height: 5.80 m
o Reach: 3.20 m
o Engine: Deutz TD 2,9 L4 EDG - Stage IIIA
o Rated power: 55 kW (75,30 hp) 2.600 rpm
o Number of gears: 2/2
o Hydraulic system: 255 bar (Load Sensing)
o Length: 3.79 m
o Width: 1.81 m
o Ground clearance: 380 mm
o Unladen weight: 4,850 kg
o Travel speed: 35 km/h

2026 MAGNI TH 3.6

Find Materials Handling For Sale from MCT EQUIPMENT.

New & Used Materials Handling For Sale in Australia

MCT EQUIPMENT

Sale Price

2026 MAGNI HTH 10.10

2025 MAGNI RTH 6.26

2026 MAGNI TH 3,5.7

2026 MAGNI TH 7.10P

2026 MAGNI TH 5,5.19P

2025 MAGNI RTH 5.18

2026 MAGNI RTH 5.25

2026 MAGNI TH 4,5.15P

2026 MAGNI RTH 8.46

2022 MAGNI HTH 10.10

2026 MAGNI HTH 20.10

2026 MAGNI TH 3.6

MCT EQUIPMENT

Dealer Address